7.12 RDP-5 SERIES
Series 5 Direct Burial “Super” Pump Vault
The RDP-5 Series Direct Burial Pump Vault is for large sized fountains. It consists of a 14′-0″ x 8′-6″ x 9′-0″ deep heavy duty FRP vault with 36″ sq. hatch opening, a fiberglass reinforced plastic lid with stainless steel piano hinge attachment, and lock hardware (LOCK BY INSTALLER). The system has bronze fitted ‘flooded-end-suction’ type display pump(s) with in-line suction strainer, a sand or cartridge filter unit, an external air relief, and pressure gauge. The unit also features a self-priming filter pumps with integral strainer, an RMS-100-NS 1″ fill manifold assembly, a 960 CFM fan-forced ventilation system,an access ladder, (Schedule 80 PVC) piping, valves, conduit and wiring, as required to meet the design intent. Additionally, the unit contains an RSX-33-F 1/3 HP automatic sump pump, a 100 watt utility work light, a duplex 20 amp G.F.C.I. protected courtesy outlet, an RPCP/RLCP; U.L. 508 listed control panel in a Nema 4 enclosure, containing a main disconnect, motor starter(s), 7 day/24 hour timeclock(s), H.O.A. switches, plus lighting contactor(s), G.F.C.I. breaker(s), and water level/low level cutoff control circuit. Unit is pre-wired, pre-plumbed (Schedule 80 PVC) and factory tested, prior to shipment. Please refer to the cut sheet for power requirements, available models, pump curves, additional information.
ETL Certification Available